How to put together a Safety 1st convertible car seat?
- 1. Feed the buckle’s metal retainer through the slot on the seat pad.
- 2. Pull firmly on the buckle to make sure it’s secure.
- 3. Thread the harness strap through the guide hole on one side of the car seat.
- 4. From the bottom of the seat, pull the harness strap down and across the seat.
Meer items
How do I install a car seat?
To install one, first recognize if you have a rear facing seat or a front facing one. Then, look at its parts to see if it is held in place by the vehicle’s seat belt, anchor belts attached to the car seat itself, or both. Always read the manufacturer’s instructions for full and precise instructions and safety recommendations.
How do you secure a seatbelt to the backseat?
Thread the seat belt through the base, alternatively. If your car seat does not use the anchor system, it will be secured to the backseat with the car’s seat belt. Feed the belt through designated openings in the base and buckle it. The seatbelt should fit cleanly, and not be twisted or bunched up.
How do you ensure a child’s safety in a car seat?
Ensuring the Child’s Safety Select a car seat based on your child’s age, weight, and height. To provide the most protection, newborns should always be in a rear facing seat. Pick a spot in the backseat. Child car seats should always be positioned in the backseat, never the front seat. Check the seat’s fit.
How to install a forward-facing car seat?
Anchor the seat with the tether. Many forward-facing car seats include an attached tether that feeds over the top of the vehicle’s seat and latches onto a metal anchor on the back. Locate this anchor and latch the tether belt to it, tightening it afterwards. Consult your vehicle’s manual if you can’t find an anchor.
