Dodge and Ram trucks are known for their rugged toughness and performance, but in order to ensure that your wheels stay securely in place, it’s important to properly tighten the lug nuts to the correct torque specifications. Here is a table of the recommended lug nut torque specs for various Dodge and Ram truck models:
Model | Year | Lug Nut Torque (ft-lbs) |
---|---|---|
Ram 1500 | 2009-2021 | 100-110 |
Ram 2500/3500 | 2009-2021 | 140-150 |
Dodge Durango | 2011-2021 | 100-110 |
Dodge Journey | 2009-2021 | 100-110 |
It’s important to note that these torque specifications are only guidelines, and it’s always best to consult your owner’s manual for the specific torque specs for your vehicle. Additionally, it’s recommended to have a professional mechanic perform this task, as over-tightening or under-tightening the lug nuts can have serious consequences, such as wheel detachment or hub damage.
To properly tighten the lug nuts, you should use a torque wrench, which is a special tool that allows you to tighten the lug nuts to the correct specifications without over-tightening or under-tightening. Start by tightening the lug nuts to about half of the recommended torque specifications, and then tighten each lug nut in a cross pattern, working your way around the wheel until all of the lug nuts are tightened to the correct specifications.
In conclusion, proper lug nut torque is crucial to ensure that your wheels stay securely in place, and to prevent potential safety hazards while driving your Dodge or Ram truck. Make sure to always consult your owner’s manual and have a professional mechanic perform this task to ensure that the lug nuts are tightened to the correct specifications.
Dodge Lug Nut Torque Specs Recommendations
Maintaining the proper lug nut torque specifications is an important aspect of vehicle maintenance, and this is especially true for Dodge vehicles. Ensuring that the lug nuts are tightened to the correct specifications helps to prevent wheel detachment or hub damage, which can be serious safety hazards while driving.
Here is a table of the recommended lug nut torque specs for various Dodge vehicle models:
Model | Year | Lug Nut Torque (ft-lbs) |
---|---|---|
Dodge Charger | 2006-2021 | 100-110 |
Dodge Challenger | 2008-2021 | 100-110 |
Dodge Grand Caravan | 2008-2021 | 100-110 |
Dodge Dart | 2013-2016 | 100-110 |
It’s important to note that these torque specifications are only guidelines, and it’s always best to consult your owner’s manual for the specific torque specs for your vehicle. Additionally, it’s recommended to have a professional mechanic perform this task, as over-tightening or under-tightening the lug nuts can have serious consequences, such as wheel detachment or hub damage.
To properly tighten the lug nuts, you should use a torque wrench, which is a special tool that allows you to tighten the lug nuts to the correct specifications without over-tightening or under-tightening. Start by tightening the lug nuts to about half of the recommended torque specifications, and then tighten each lug nut in a cross pattern, working your way around the wheel until all of the lug nuts are tightened to the correct specifications.
In conclusion, proper lug nut torque is crucial to ensure that your wheels stay securely in place, and to prevent potential safety hazards while driving your Dodge vehicle. Make sure to always consult your owner’s manual and have a professional mechanic perform this task to ensure that the lug nuts are tightened to the correct specifications. By following these guidelines, you can help to keep your Dodge vehicle running smoothly and safely on the road.
Make | Model | Trim | Year Range | Torque |
---|---|---|---|---|
DODGE | AVENGER | 14-INCH / BASE/ES | 1995 – 1998 | 100 ft-lbs |
AVENGER | 16″BASE / SE | 2008 – 2014 | 110 ft-lbs | |
AVENGER | 14-INCH / BASE | 1999 – 2000 | 80 ft-lbs | |
CALIBER | 17-INCH / SXT/SPORT | 2007 – 2012 | 100 ft-lbs | |
CARAVAN | 15″BASE / SE | 1996 – 2007 | 110 ft-lbs | |
CARAVAN | 4-100 / 195/75R14 | 1985 – 1995 | 95 ft-lbs | |
CHALLENGER | 20″BASE / SRT-8 | 2008 – 2013 | 110 ft-lbs | |
CHALLENGER | HELLCAT / SRT 392 | 2015 – 2018 | 115 ft-lbs | |
CHALLENGER | DODGE | 2019 | View | |
CHALLENGER | SRT HELLCAT | 2019 | View | |
CHARGER | RWD / DAYTONA RT | 2006 – 2018 | 110 ft-lbs | |
CHARGER | SRT | 2019 | View | |
CHARGER | HELLCAT / SRT 392 | 2015 – 2018 | 115 ft-lbs | |
CHARGER – POLICE EDT | 18″BASE / POLICE EDT | 2009 – 2013 | 140 ft-lbs | |
CHARGER | POLICE | 2019 | View | |
CHARGER | ALL / SHELBY | 1985 – 1987 | 95 ft-lbs | |
COLT | ALL / GT/TURBO | 1987 – 1996 | 80 ft-lbs | |
CONQUEST | 14-INCH / ALL 4-LUG | 1985 – 1989 | 95 ft-lbs | |
D150/D250 | 2WD / 4WD | 1986 – 1993 | 105 ft-lbs | |
D350 | 2WD / 4WD | 1986 – 1993 | 110 ft-lbs | |
D350 | DUALLY 2WD / 4WD | 1986 – 1993 | 160 ft-lbs | |
DAKOTA – 215/75R15 | 4WD / 215/75R15 | 1991 – 2004 | 110 ft-lbs | |
DAKOTA | ALL CABS / 265/65R17 | 2005 – 2012 | 135 ft-lbs | |
DAKOTA – 205/75R15 | 2WD / 205/75R15 | 1988 – 1994 | 85 ft-lbs | |
DART – MOPAR 18 INCH | 18″BASE / MOPAR 13 | 2013 – 2018 | 100 ft-lbs | |
DART – 18 INCH | 18″BASE / R/T | 2013 – 2013 | 115 ft-lbs | |
DART – 16 INCH | 16″BASE / SE | 2013 – 2013 | 95 ft-lbs | |
DAYTONA | BASE / 185/70R14 | 1987 – 1993 | 95 ft-lbs | |
DURANGO | 4WD / 235/75R15 | 1998 – 2003 | 110 ft-lbs | |
DURANGO | 2WD / ST | 2004 – 2005 | 115 ft-lbs | |
DURANGO | 2WD / ST | 2005 – 2009 | 135 ft-lbs | |
DURANGO – ALL | 18″BASE / EXPRESS | 2011 – 2018 | 110 ft-lbs | |
DURANGO | DODGE | 2019 | View | |
DURANGO | SRT | 2019 | View | |
DYNASTY | 4 DOOR / ALL | 1988 – 1993 | 95 ft-lbs | |
GRAND CARAVAN – 14 INCH | 14″BASE / BASE | 1996 – 2000 | 100 ft-lbs | |
GRAND CARAVAN | 16″BASE / AMERICAN | 2012 – 201 | 105 ft-lbs | |
GRAND CARAVAN – 16 INCH | 16″OPT. / LE/SE | 1996 – 2004 | 110 ft-lbs | |
GRAND CARAVAN – 5-100 BOLT | 5-100 / ALL | 1986 – 2014 | 95 ft-lbs | |
GRAND CARAVAN | ALL | 2019 | View | |
INTREPID | 15-INCH / BASE | 1998 – 2004 | 100 ft-lbs | |
INTREPID | 15-INCH / BASE | 1993 – 1997 | 95 ft-lbs | |
JOURNEY | 19″BASE / R/T | 2009 – 2016 | 95 ft-lbs | |
JOURNEY | ALL | 2019 | View | |
LANCER | ALL / BASE/ES | 1985 – 1989 | 95 ft-lbs | |
MAGNUM | RWD / RT | 2005 – 2008 | 110 ft-lbs | |
MONACO | 2/4 DOOR / P195/70R14 | 1989 – 1992 | 80 ft-lbs | |
NEON | 4-LUG / P165/80R13 | 1995 – 2005 | 100 ft-lbs | |
NITRO | 17-INCH / SXT/SLT | 2007 – 2012 | 110 ft-lbs | |
OMNI | ALL / GLH | 1985 – 1990 | 95 ft-lbs | |
RAM 150 | 4WD / P235/75R15 | 1986 – 1993 | 105 ft-lbs | |
RAM 1500 | 16″OPT / STD. CAB | 1994 – 2001 | 110 ft-lbs | |
RAM 1500 – 20 INCH | 20″BASE / LARAMIE | 2009 – 2012 | 130 ft-lbs | |
RAM 1500 – 17 INCH | 17″OPT / SLT/SLT+ | 2002 – 2010 | 135 ft-lbs | |
RAM 1500 | ALL | 2019 | View | |
RAM 1500 DT | ALL | 2019 | View | |
RAM 250 | 16″BASE / 2WD | 1986 – 1993 | 105 ft-lbs | |
RAM 2500 – ST/SLT | 16″BASE / ST/SLT | 1994 – 2012 | 135 ft-lbs | |
RAM 2500 – LARAMIE | QUAD CAB / LARAMIE | 2005 – 2007 | 145 ft-lbs | |
RAM 2500 | ALL | 2019 | View | |
RAM 350 | 16″BASE / SRW | 1986 – 1993 | 110 ft-lbs | |
RAM 350 | 16″BASE / SRW | 1986 – 1993 | 160 ft-lbs | |
RAM 3500 | 2WD / ST/SLT | 2000 – 2012 | 135 ft-lbs | |
RAM 3500 | DUALLY / ST/SLT | 1994 – 2007 | 145 ft-lbs | |
RAM 3500 | DUALLY / ST/SLT | 1994 – 2002 | 150 ft-lbs | |
RAM 3500 DUALLY | 17″BASE / ST/SLT | 2008 – 2012 | 145 ft-lbs | |
RAM 3500 | ALL | 2019 | View | |
RAM 3500 HD | ALL | 2019 | View | |
RAM 4500 HD | ALL | 2019 | View | |
RAM 5500 HD | ALL | 2019 | View | |
RAM 50 | ALL / P205/75R14 | 1988 – 1993 | 100 ft-lbs | |
RAMCHARGER | 2WD / P235/75R15 | 1988 – 1993 | 105 ft-lbs | |
RAM PROMASTER CITY | ALL | 2019 | View | |
RAM PROMASTER | ALL | 2019 | View | |
SHADOW | 13-INCH / BASE/L/H | 1987 – 1994 | 95 ft-lbs | |
SPIRIT | 14-INCH / BSE/ES/LE | 1989 – 1995 | 95 ft-lbs | |
SPRINTER 2500 | W/ALU.WHLS / 6- LUG | 2003 – 2005 | 140 ft-lbs | |
SPRINTER 2500 | W/ALU.WHLS / 6- LUG | 2006 – 2008 | 135 ft-lbs | |
SPRINTER 2500 | W/STL.WHLS / 6- LUG | 2006 – 2008 | 180 ft-lbs | |
SPRINTER 3500 | C-LD RNG / W/ALU.WHLS | 2006 – 2008 | 135 ft-lbs | |
SPRINTER 3500 | DUALLY / 195/70R15D | 2003 – 2009 | 140 ft-lbs | |
STEALTH | 2 DOOR / R/T-TURBO | 1991 – 1996 | 100 ft-lbs | |
STRATUS – BASE W/ABS | SEDAN / BASE W/ABS | 1995 – 1999 | 100 ft-lbs | |
STRATUS – ES | SEDAN / ES | 1995 – 2006 | 110 ft-lbs | |
STRATUS – COUPE | COUPE / SE | 2001 – 2005 | 80 ft-lbs | |
VAN/WAGON | 15″OPT.2 / B150/1500 | 1989 – 1997 | 110 ft-lbs | |
VAN/WAGON | 15″BASE / B150/1500 | 1997 – 2003 | 115 ft-lbs | |
VAN/WAGON – B350/3500 | BASE 225 / B350/3500 | 1989 – 2003 | 150 ft-lbs | |
VIPER | 2 DOOR / CABRIOLET | 1992 – 2010 | 100 ft-lbs | |
VIPER | BASE / ALL | 2013 – 2018 | 110 ft-lbs | |
VISTA | WAGON / P165/80R13 | 1985 – 1991 | 60 ft-lbs |
Remove or Install Front or Rear Wheel – Generic Instructions
Removing or installing a wheel on a vehicle can seem like a daunting task, but it’s actually a fairly simple process that can be done with a few basic tools. Whether you’re changing a flat tire, performing routine maintenance, or upgrading your wheels, here are some generic instructions that will help you remove or install a front or rear wheel on most vehicles.
Tools required:
- Jack
- Jack stands
- Lug wrench or socket set
- Wheel chocks (for safety)
Instructions:
- Park the vehicle on a level surface and engage the emergency brake.
- Place wheel chocks behind and in front of the wheels opposite the one you will be working on to ensure the vehicle does not move.
- Use the lug wrench or socket set to loosen the lug nuts on the wheel, but do not remove them yet.
- Locate the jack points on your vehicle and position the jack under the appropriate point for the wheel you will be removing or installing.
- Slowly raise the jack until it is supporting the vehicle, but not lifting it off the ground.
- Remove the lug nuts and set them aside.
- If removing the wheel, gently pull the wheel towards you to remove it from the studs.
- If installing the wheel, align the studs with the holes in the wheel and gently push the wheel onto the studs.
- Replace the lug nuts and tighten them by hand.
- Slowly lower the vehicle back to the ground using the jack.
- Use the lug wrench or socket set to tighten the lug nuts to the proper torque specifications. It’s important to tighten the lug nuts in a cross pattern, working your way around the wheel, to ensure an even distribution of force.
- Repeat steps 3-11 for each additional wheel you need to remove or install.
It’s important to always follow the proper torque specifications when tightening the lug nuts, as over-tightening or under-tightening the lug nuts can have serious consequences, such as wheel detachment or hub damage. Additionally, it’s recommended to have a professional mechanic perform this task, especially if you’re not familiar with removing or installing wheels.
In conclusion, removing or installing a wheel on a vehicle is a simple process that can be done with a few basic tools. By following these generic instructions, you can remove or install front or rear wheels on most vehicles, and keep your vehicle running smoothly and safely on the road.
Dodge Ram 1500/2500/3500 Lug Nut Torque Specs And Sizes
Dodge Ram 1500/2500/3500 | ||
---|---|---|
Year | Lug Nut Torque | Lug Nut Size |
2002 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2003 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2004 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2005 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2006 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2007 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2008 | 120 – 150 for cone type and 130 – 160 for flanged | 9/16 – 18 |
2009 | 130 lbf.ft (1500), 135 lbf.ft (2500/3500 single re | 9/16 – 18 |
2010 | 130 lbf.ft (1500), 135 lbf.ft (2500/3500 single re | 9/16 – 18 |
2011 | 130 lbf.ft (1500), 135 lbf.ft (2500/3500 single re | 9/16 – 18 |
2012 | 130 lbf.ft (1500), 135 lbf.ft (2500/3500 single re | M14 x 1.50 / 22mm |
2013 | 130 lbf.ft (1500), 135 lbf.ft (2500/3500 single re | M14 x 1.50 / 22mm |
2014 | 130 lbf.ft for cone type and 140 lbf.ft for flange | M14 x 1.50 / 22mm |
2015 | 130 lbf.ft for cone type and 140 lbf.ft for flange | M14 x 1.50 / 22mm |
2016 | 130 lbf.ft for cone type and 140 lbf.ft for flange | M14 x 1.50 / 22mm |
2017 | 130 lbf.ft for cone type and 140 lbf.ft for flange | M14 x 1.50 / 22mm |
2018 | 130 lbf.ft for cone type and 140 lbf.ft for flange | M14 x 1.50 / 22mm |