How To Fit A Toilet Seat With Plastic Fittings?

How To Fit A Toilet Seat With Plastic Fittings
3 Install the new toilet seat – Slide the plastic bolts into the slots on the back of the new seat. Insert the bolts into the holes at the back of the toilet bowl and screw the wing nuts into place. Once the nuts have been firmly tightened, the seat is installed and ready for use.

How to fit a toilet seat?

Step By Step Guide to Fitting a Toilet Seat – Follow these steps to get your seat fitted correctly:

  1. Adjust the Hinges – Most seats allow you to adjust the hinges using a locking screw below the hinge, passing through the hinge plate. Make any adjustment necessary then tighten the screw. Typically there are three adjustments that you can make:
    • Fine adjustments can be made by rotating the hinge plate; this ensures that the fixing bolts can be adjusted so both will go into their respective holes in the toilet pan or bowel
    • To adjust the position of whole seat forward (or backwards), it is possible to turn both the hinge plates 180o. This moves both the front of the seat is it over hangs or does not reach the front of the bowl. It also moves the hinge forward so that the seat (Lid and Ring) can rest against the cistern without falling down
    • In some toilet seat fixing brackets there are other holes into which the fixing bolt can be screwed into, this has the same effect at turning the hinge plate as described above, but allows further adjustment which would not be possible otherwise. In cheaper seats the fixing bolt is prefixed so this is not an option

    Altering the location of the fixing bolt in the hinge plate can move the position of the hinge forward

  2. Tighten the Hinge Locking Screw – Even if you don’t adjust the hinge, tighten the screw! If not tight this will work loose further and cause the seat to become loose and wobble and slide on top of the bowl, which is annoying. And the only solution is to remove the seat and tighten this properly. Most people forget to do this in the excitement of fitting their new seat!
  3. Ensure that the Fixing Bolt is tight, if it possible to be moved
  4. Place the seat and fixings on to the toilet, with the ring and lid lowered. If the hinge plate is metal, there will be a plastic or rubber washer which will and must sit between the pan and the metal plate. This reduces corrosion and most importantly stops the porcelain becoming scratched or damaged
  5. Fit the washers and fixing bolt. This can be very fiddly, but make sure you get them in the right order, as there should be no metal pressing on the ceramic of the pan:
    • Rubber or plastic washer – to protect the pan
    • Metal washer (if there is one) – to spread the pressure
    • Fixing Bolt at the bottom – holding everything on.
  6. Tighten the fixing bolts – after a few days you will need to return and tighten the fixing bolt again. The rubber or plastic will become compressed and therefore allow a little play in the fixing

How do you replace a toilet seat with a bolt?

Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.

  1. 1 Measure your current toilet bowl before buying a new seat. Most toilets are standard sized, and any replacement seat should fit. If you want to be extra sure, take a tape measure to check the distance between the bolt holes in the toilet bowl. Then make sure the distance between the bolts on the replacement seat is the same.
  2. 2 Choose the style of seat you want. Toilet seats come in 2 basic styles, and a home supply store should have several brands to choose from. The standard variety is rounded, but you can choose an elongated one if you prefer. You can also purchase a “whisper close” seat that has special pads on the bottom to prevent it from slamming down on the bowl.

    Toilet seats come in a range of prices. You should be able to find the cheapest for $20-30, but others that cost twice as much or more.

  3. 3 Choose a seat color that matches your current toilet bowl.

    How do you remove a toilet seat that won’t stay up?

    Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.

    1. 1 Measure your current toilet bowl before buying a new seat. Most toilets are standard sized, and any replacement seat should fit. If you want to be extra sure, take a tape measure to check the distance between the bolt holes in the toilet bowl. Then make sure the distance between the bolts on the replacement seat is the same.
    2. 2 Choose the style of seat you want. Toilet seats come in 2 basic styles, and a home supply store should have several brands to choose from. The standard variety is rounded, but you can choose an elongated one if you prefer. You can also purchase a “whisper close” seat that has special pads on the bottom to prevent it from slamming down on the bowl.

      Toilet seats come in a range of prices. You should be able to find the cheapest for $20-30, but others that cost twice as much or more.

    3. 3 Choose a seat color that matches your current toilet bowl.

      How do you install a toilet seat with hinges?

      Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.

      1. 1 Measure your current toilet bowl before buying a new seat. Most toilets are standard sized, and any replacement seat should fit. If you want to be extra sure, take a tape measure to check the distance between the bolt holes in the toilet bowl. Then make sure the distance between the bolts on the replacement seat is the same.
      2. 2 Choose the style of seat you want. Toilet seats come in 2 basic styles, and a home supply store should have several brands to choose from. The standard variety is rounded, but you can choose an elongated one if you prefer. You can also purchase a “whisper close” seat that has special pads on the bottom to prevent it from slamming down on the bowl.

        Toilet seats come in a range of prices. You should be able to find the cheapest for $20-30, but others that cost twice as much or more.

      3. 3 Choose a seat color that matches your current toilet bowl.